欢迎访问本网站~

联系电话:18936937070

产品中心

您的位置: 主页 > 产品中心 > 铠装光缆

GYTA地埋光缆,双铠双护套地埋光缆

发布日期:2016-09-23 08:52浏览次数:110

产品描述 Description

GYTA光缆的结构是将250µm光纤套入高模量材料制成的松套管中,松套管内填充防水化合物。缆芯的中心是一根金属加强芯,对于某些芯数的光缆来说,金属加强芯外还需挤上一层聚乙烯(PE)。松套管(和填充绳)围绕中心加强芯绞合成紧凑和圆形的缆芯,缆芯内的缝隙充以阻水填充物。涂塑铝带(APL)纵包后挤制聚乙烯护套成缆。 
The fibers, 250µm, are positioned in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. A steel wire, sometimes sheathed with polyethylene (PE) for cable with high fiber count, locates in the center of core as a metallic strength member. Tubes (and fillers) are stranded around the strength member into a compact and circular cable core. An Aluminum Polyethylene Laminate (APL) is applied around the cable core, which is filled with the filling compound to protect it from water ingress. Then, the cable is completed with a PE sheath.


 

产品特点 Characteristics

 


光缆结构图Cable Structure

1.具有很好的机械性能和温度特性
Good mechanical and temperature performance

2.松套管材料本身具有良好的耐水解性能和较高的强度
High strength loose tube that is hydrolysis resistant

3.管内充以特种油膏,对光纤进行了关键性保护
Special tube filling compound ensure a critical protection of fiber

4.特别设计的紧密的光缆结构,有效防止套管回缩
Specially designed compact structure is good at preventing loose tubes from shrinking

5.PE护套具有很好的抗紫外辐射性能
PE sheath protects cable from ultraviolet radiation

6.采用下列措施来确保光缆的防水性能:
The following measures are taken to ensure the cable watertight:

  • 单根钢丝中心加强芯
    Steel wire used as the central strength member
  • 松套管内填充特种防水化合物
    Loose tube filling compound
  • 完全缆芯填充
    100% cable core filling
  • 涂塑铝带 (APL) 防潮层
    APL moisture barrier
 

产品标准Standards

七号桥公司GYTA光缆符合YD/T 901和IEC 60794-1标准 
QiHaoQiao GYTA cable complies with Standard YD/T 901 as well as IEC 60794-1.

 

(GYTA)适用:管道、架空Application: Duct / Aerial

光学特性Optical Characteristics

光纤类型 Fiber Typefdf G.652 G.655 50/125 µm 62.5/125 µm
衰减 Attenuation(+20℃) @ 850 nm     ≤ 3.3 dB/km ≤ 3.5 dB/km
@1300 nm     ≤ 1.2 dB/km ≤ 1.2 dB/km
@1300 nm ≤ 0.36 dB/km ≤ 0.40 dB/km    
@1550 nm ≤ 0.22 dB/km ≤ 0.23 dB/km    
带宽 Bandwidth @ 850 nm     ≥ 500 MHz•km ≥ 200 MHz•km
@1300 nm     ≥ 500 MHz•km ≥ 500 MHz•km
数值孔径 Numerical Aperture     0.200 ± 0.015 NA 0.275 ± 0.015 NA
光缆截止波长Cable Cut-off Wavelength lcc ≤ 1260 nm ≤ 1450 nm    
 

使用光纤产品标准

七号桥光缆微弯不敏感单模光纤满足或者优于ITU-T推荐的G.652.D/G.657.A和IEC 60793-2-50 B1.3型光纤技术规范。

七号桥光缆弯曲不敏感单模光纤满足或者优于ITU-T推荐的G.652.D/G.657.A/G.657.B和IEC 60793-2-50 B1.3型光纤技术规范。

七号桥匹配包层单模光纤符合或优于ITU-T推荐的G.652和IEC 60793-2-50 B1型光纤技术规范。

七号桥光缆低水峰单模光纤符合或优于ITU-T推荐的G.652[C和D]和IEC 60793-2-50 B1.3型光纤技术规范。

七号桥光缆单模光纤符合或优于ITU-T推荐的G.655和IEC 60793-2-50 B4型光纤技术规范。

七号桥50/125 μm多模光纤符合或优于ITU-T推荐的G.651和IEC 60793-2-10 A1a.1型光纤技术规范。

七号桥62.5/125 μm多模光纤符合或优于ITU-T推荐的G.651和IEC 60793-2-10 A1b型光纤技术规范。

七号桥多模光纤符合或优于ITU-T推荐的G.651和IEC 60793-2-10 A1a.1型或A1b光纤技术规范。

七号桥多模光纤符合或优于TIA/EIA-492AAAC、ISO/IEC 11801 OM3类 和IEC 60793-2-10 A1a.2型光纤技术规范。

七号桥光纤适用于各类光缆结构,包括室内紧套光缆、松套层绞式光缆、中心管式光缆、骨架式光缆和光纤带光缆等。七号桥光纤在使用中与用其它工艺生产的光纤相容。

 

 

七号桥室外光缆颜色规定

松套管中光纤的色谱排列

七号桥光缆中的光纤色谱为标准色谱,符合YD/T 901-2001的规定。

国际光纤色谱

注解:

a.松套管中光纤不足12纤时,色谱从1号起连续取用;

b.国际色谱中,6号白色可用自然色代替,称为国标色谱W;

c.可按照客户要求的色谱生产。

光缆中松套管的色谱排列

七号桥光缆中的光纤色谱分为领示色谱和全色谱,符合YD/T 901-2001的规定。

领示色谱

注解:

a.领示色谱缆芯里含有填充绳时,填充绳一般紧靠红管排列,合同有特殊要求的除外;

b.领示色谱缆芯里只有一根套管时,该套管一般为绿色,合同有特殊要求的除外。

全色谱


友情链接:
地址:江苏省宿迁市宿豫区京东产业园02栋 备案号:苏ICP备16039092号-1